TC1200 REFERENCE MANUAL
126
5
5.3.2 Code Identifiers
Label IDs
A Label ID is a customizable code of up to three ASCII characters (each can be from 0x00 -
0xFF), used to identify a barcode (symbology) type. It can be appended previous to or
following the transmitted barcode data depending upon how this option is enabled. This
feature provides options for configuring custom Label IDs as a pre-loaded set (see "Label ID:
Pre-loaded Set") or individually per symbology (see "Label ID: Set Individually Per
Symbology").
If you wish to program the reader to always include an industry standard label identifier for
ALL symbology types, see "Global AIM ID" on page 128.
Label ID: Pre-loaded Set
The reader supports a pre-loaded set of Label IDs. The following table shows this set.
BARCODE SYMBOLOGY Factory Label ID Set Custom
EAN 8 A
EAN 8 with 2 Add On J
EAN 8 with 5 Add On K
EAN 13 B
EAN 13 with 2 Add On L
EAN 13 with 5 Add On M
UPC A C
UPC A with 2 Add On F
UPC A with 5 Add On G
UPC E D
UPC E with 2 Add On H
UPC E with 5 Add On I
GTIN $A
GTIN with 2 Add On $B
GTIN with 5 Add On $C
Code 39 V
Code 32 X
Code 128 T
GS1-128 k
ISBN @
ISSN n
ISBT 128 f
Interleaved 2 of 5 N
Standard 2 of 5 P
Codabar R
ABC Codabar S
Code 11 b
GS1 Databar Omnidirectional u
GS1 Databar Expanded t
GS1 Databar Limited v
Code 93 U
MSI Z
To Next Page
Loading...
Need help?
General
