DATREND Systems ES601 Plus - Electrical Specifications; Environment for Use; Dimensions; Weight

ES601Plus OPERATING MANUAL
Equipment Technical Specifications
1.13 Electrical Specifications
- Country Specific: 120 VAC(+/- 10%), 60 Hz, 16A in 20A circuit
120 VAC(+/- 10%), 60 Hz, 12A in 15A circuit
230 VAC(+/- 10%), 50 Hz, 13A
Notes:
- This instrument has been designed to test equipment that meets local power distribution
standards, which limit devices to draw no more than 80% of the specified current capacity
of a circuit. For instance, a single device should draw no more than 16A from a single
receptacle on a 20A circuit.
- Externally Accessible Fuses: 1A/250V AGC
- Transient overvoltages typically present on the mains supply are expected to be impulse
withstand (overvoltage) category II of IEC 60364-4-443.
1.14 Environment for Use
- 15 to 40 EC
- 10% to 90% RH
- Altitude: 2000m max.
- Indoor use only
- Pollution Degree 2
1.15 Dimensions
- 9" (23 cm) W x 9" (23 cm) D x 10" (25 cm) H
1.16 Weight
- 12 lbs (5.4 kg) Standard
- 17 lbs (7.7 kg) with PETM option
1.17 Standard Accessories
- Kelvin Cable (P/N 3140-425)
- USB Cable (P/N 3140-403)
- ES601pc Software on CDROM (P/N 6950-003)
- Operating Manual on CDROM
- Power Cord (country specific)
- North America 15A (P/N 3000-009)
- Continental Europe (P/N 3000-011)
- United Kingdom (P/N 3000-012)
- Australia (P/N 3000-018)
- Accessory Bag (P/N 7006-052)
Specifications/Chapter 1 # Page 7