DATREND Systems ES601 Plus - Optional Accessories; Installed Software Modules; Optional Software Modules; Compliance with Standards

ES601Plus OPERATING MANUAL
1.18 Optional Accessories
For a complete list of available accessories, visit www.datrend.com or contact Datrend Customer
Service (see Chapter 9 for contact details)
1.19 Installed Software Modules
- Safety Limits Editor
- Safety AutoSequence Editor
- Autosequence Editor
- Test Procedure Editor
- ECG AutoSequence Editor
- Test Report Generator
- Equipment Record Plug-in
- CMMS Data Converters
1.20 Optional Software Modules
Languages: English, French, German, Italian
Note: Language Options can only be installed at the Factory or by an Authorized Service Center only.
Contact Datrend Customer Service for complete details. Refer to Chapter 9 for contact information.
1.21 Compliance With Standards
ES601Plus has been certified to meet the following safety standards:
CAN/CSA-C22.2 No. 61010-1-(2 Edition) - Safety Requirements for Electrical Equipment for
nd
Measurement, Control, and Laboratory Use, Part 1: General Requirements
UL Std. No. 61010-1 (2 Edition) - Safety Requirements for Electrical Equipment for Measurement,
nd
Control, and Laboratory Use - Part 1: General Requirements
IEC/EN 61010-1 (Ed.2.0) - Safety requirements for electrical equipment for measurement, control, and
laboratory use - Part 1: General requirement
Following manufacture, all units are subjected to, and have passed the requirements of the ‘Routine Tests’
defined in Annex F of the above Standard(s).
Specifications/Chapter 1 # Page 8