Figure 61. Installing the LOM riser card
Next steps
1 If removed, replace the expansion card riser.
2 Follow the procedure listed in After working inside your system.
Hard drive backplane
Depending on your system conguration, the hard drive backplanes supported in PowerEdge XR2 are listed here:
Table 33. Supported backplane options for
PowerEdge XR2 systems
System Supported drives options
PowerEdge XR2 2.5 inch (x8) SAS, SATA backplane
Figure 62. 8 X 2.5 inch drive backplane
1
Latch 2 Jumpers
3 SAS/SATA B cable connector 4 Power connector
5 SAS/SATA A cable connector 6 Signal connector
Installing and removing system components 101
To Next Page
Loading...
