Steps
1 Align the thumb screws on the bezel with the rack ears on the front of the system.
2 Using a Phillips #2 screwdriver, tighten the thumb screws to secure the bezel to the system chassis.
Figure 14. Installing the front bezel
Removing the bezel lter
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Remove the front bezel.
Steps
1 Remove the screw that secures the lter frame to the bezel.
2 Rotate one end of the lter frame away from the bezel and remove the lter frame.
3 Remove the lter.
56
Installing and removing system components
To Next Page
Loading...
