Dell EMC PowerEdge XR2 - Air Shroud; Removing the Air Shroud

Figure 24. Installing the Smart Card Reader bracket
Next steps
1 Reconnect all cables to the Smart Card Reader.
NOTE
: Ensure that the cables inside the system are routed along the chassis wall and secured using the cable securing
bracket.
2 Follow the procedure listed in After working inside your system.
Air shroud
The air shroud directs the airow across the entire system. Air shroud prevents the system from overheating and is used to maintain
uniform airow inside the system.
Removing the air shroud
Prerequisites
CAUTION
: Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in
shutdown of the system and loss of data.
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
Step
Holding the touch points, lift the air shroud away from the system.
66
Installing and removing system components