Base Cover 13
2
Base Cover
WARNING: Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery
(see "Removing the Battery" on page 17) before working inside the computer.
Removing the Base Cover
1
Follow the instructions in "Before You Begin" on page 9.
2
Remove the eight screws that secure the base cover to the palm-rest
assembly.
3
Using your fingertips, carefully pull the connector bezel to separate it from
the base cover.
book.book Page 13 Friday, February 21, 2014 12:07 PM
To Next Page
Loading...
