EasyManuals Logo

Dell PowerConnect 3524P User Manual

Dell PowerConnect 3524P
474 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
Configuring System Information 105
Defining SNTP Authentication Methods
The SNTP Authentication page enables SNTP authentication between the device and an SNTP server.
The means by which the SNTP server is authenticated is also selected in the SNTP Authentication page.
Click System SNTP Authentication in the tree view to open the SNTP Authentication page.
Figure 6-11. SNTP Authentication
The SNTP Authentication page contains the following:
SNTP Authentication
— Enables or disables authenticating an SNTP session between the device and
an SNTP server.
Enable
— Authenticates SNTP sessions between the device and SNTP server.
Disable
— Disables authenticating SNTP sessions between the device and SNTP server.
Encryption Key ID
— Defines the Key Identification used to authenticate the SNTP server and
device. The field value is up to 4294967295.
Authentication Key (up to 8 Characters)
— The key used for authentication.
Trusted Key
Indicates if the encryption key is used (Unicast) to authenticate the SNTP server.
Checked —
Encryption key is used.
Unchecked
Encryption key is not used.
Remove
— Removes selected authentication keys.
Checked —
Removes the selected Encryption Key ID.
Unchecked
Maintains the Encryption Key IDs. This is the default value.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 3524P and is the answer not in the manual?

Dell PowerConnect 3524P Specifications

General IconGeneral
MAC address table8000 entries
Maximum data transfer rate0.1 Gbit/s
Supported data transfer rates10/100 Mbps
10G support-
Number of VLANs256
Flow control supportYes
Networking standardsIEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ad
Dimensions (WxDxH)440 x 387 x 43.2 mm
Power requirements100-240VAC, 50-60Hz
Networking featuresGigabit Ethernet, Fast Ethernet
Authentication methodRADIUS, TACACS+
Connectivity technologyWired
Switch typeManaged
Switch layerL2
Data link protocolsEthernet
Supported network protocolsHTTP, HTTPS/SSL, SSH
Power connectorDC-in jack
SFP/SFP+ slots quantity2
Basic switching RJ-45 Ethernet ports quantity24
Product colorBlack
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 45 °C
Storage relative humidity (H-H)10 - 95 %
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight8000 g

Related product manuals