396 Configuring Switch Information
The following is an example of the CLI commands:
IGMP Snooping
The IGMP Snooping page contains fields for adding IGMP members. To open the IGMP Snooping
page, click Switch→ Multicast Support→ IGMP Snooping in the tree view.
Figure 7-74. IGMP Snooping
Console(config)# interface vlan 1
Console(config-if)# bridge multicast forward-all add ethernet
1/e3
Console(config-if)# end
Console# show bridge multicast filtering 1
Filtering: Enabled
VLAN: Forward-All
Port Static Status
------- ----------------- -----------
1/e11 Forbidden Filter
1/e12 Forward Forward(s)
1/e13 - Forward(d)
To Next Page
Loading...
