200 Configuring System Information
The following is an example of the CLI commands:
Configuring RADIUS Settings
Remote Authorization Dial-In User Service (RADIUS) servers provide additional security for networks.
Up to four RADIUS servers can be defined. RADIUS servers provide a centralized authentication
method for:
• Telnet Access
• Secure Shell Access
• Web Access
• Console Access
To open the RADIUS Settings page, click System → Management Security → RADIUS in the tree view.
console# show tacacs
Device Configuration
IP address Status Port Single
Connection
TimeOut Source IP Priority
----------- --------- ---- ---------- -------- --------- ---------
12.1.1.2 Not
Connected
49 Yes 1 12.1.1.1 1
Global values
-----------------
TimeOut : 5
Device Configuration
--------------------
Source IP : 0.0.0.0
console#
To Next Page
Loading...
