Configuring System Information 199
4
Select the
Remove
check box.
5
Click
Apply Changes
.
The TACACS+ server is removed, and the device is updated.
Defining TACACS+ Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in
theTACACS+ Settings page.
Table 6-41. TACACS+ CLI Commands
CLI Command Description
tacacs-server host {ip-address | host-
name} [single-connection] [port port-
number] [timeout timeout] [key key-
string] [source source] [priority priority]
Indicates a TACACS+ host.
tacacs-server key key-string
Indicates the authentication and encryption key
for all TACACS+ communications between the
device and the TACACS+ server. This key must
match the encryption used on the TACACS+
daemon. (Range: 0 - 128 characters.)
tacacs-server timeout timeout Indicates the timeout value in seconds. (Range: 1
- 30.)
tacacs-server source-ip source Indicates the source IP address. (Range: Valid
IP Address.)
show tacacs [ip-address] Displays configuration and statistics for a
TACACS+ server.
To Next Page
Loading...
