Using Dell OpenManage Switch Administrator 69
Using Dell OpenManage Switch Administrator
This section provides an introduction to the Dell™ OpenManage™ Switch Administrator
user interface.
Starting the Application
NOTE: Before starting the application the IP address must be defined. For more information, see Initial
Configuration.
1
Open a web browser.
2
Enter the device’s IP address in the address bar and press <Enter>.
3
When the
Log In
window displays, enter a user name and password.
NOTE: Passwords are both case sensitive and alpha-numeric.
4
Click
OK
.
The
Dell OpenManage
Switch Administrator
home page displays.
Understanding the Interface
The home page contains the following views:
•
Tree view
— Located on the left side of the home page, the tree view provides an expandable view
of the features and their components.
•
Device view
— Located on the right side of the home page, the device view provides a view of the
device, an information or table area, and configuration instructions.
To Next Page
Loading...
