Dell PowerConnect 3524P - Page 198

198 Configuring System Information
Figure 6-71. Add TACACS+ Host
3 Define the fields.
4 Click Apply Changes .
The TACACS+ server is added, and the device is updated.
Displaying the TACACS+ Table
1 Open the TACACS+ Settings page.
2 Click Show All .
The
TACACS+ Table opens.
Figure 6-72. TACACS+ Table
Removing a TACACS+ Server
1 Open the TACACS+ Table page.
2 Click Show All .
The
TACACS+ Table opens.
3 Select a TACACS+ Table entry.