108 Configuring System Information
Figure 6-14. SNTP Servers
The SNTP Servers page contains the following fields:
•
SNTP Server
— Select a user-defined SNTP server IP address. Up to eight SNTP servers can
be defined.
•
Poll Interval
— Polls the selected SNTP Server for system time information, when enabled.
•
Encryption Key ID
— Indicates the Key Identification used to communicate between the SNTP
server and device. The range is 1 - 4294967295.
•
Preference
— The SNTP server providing SNTP system time information. The possible field values are:
–
Primary
— The primary server provides SNTP information.
–
Secondary
— The backup server provides SNTP information.
•
Status
— The operating SNTP server status. The possible field values are:
–
Up
— The SNTP server is currently operating normally.
–
Down
— Indicates that a SNTP server is currently not available. For example, the SNTP server is
currently not connected or is currently down.
–
In progress
— The SNTP server is currently sending or receiving SNTP information.
–
Unknown
— The progress of the SNTP information currently being sent is unknown.
For example, the device is currently looking for an interface.
•
Last Response
— The last time a response was received from the SNTP server.
To Next Page
Loading...
