Dell PowerConnect 3524P

132 Configuring System Information
The IP Interface Parameters page contains the following parameters:
• IP Address — The interface IP address.
•
Prefix Length — The number of bits that comprise the IP address prefix.
•
Interface — The interface type for which the IP address is defined. Select Port , LAG , or VLAN .
•
Ty p e — Indicates whether or not the IP address was configured statically.
•
Remove — Removes the interface from the IP Address drop-down menu.
–
Checked — Removes the selected interface.
–
Unchecked — Maintains the selected interface.
Adding an IPv4 IP Interface
1 Open the IPv4 Interface Parameters page.
2 Click Add .
The
Add a Static IPv4 Interface page opens.
Figure 6-28. Add a Static IPv4 Interface
In addition to the parameters on the IP Interface Parameters page, the Add a Static IP Interface page
contains the following parameter:
•
Network Mask — Indicates the subnetwork mask of the IP address.
3 Complete the fields on the page.
4 Click Apply Changes .
The new IP address is added to the interface, and the device is updated.
Modifying IPv4 Address Parameters
1 Open the IPv4 Interface Parameters page.
2 Select an IP address in the IP Address drop-down menu.