Dell PowerConnect 3524P

Configuring System Information 135
The DHCP IP Interface page contains the following fields:
• Interface — The DHCP client interface. Click the option button next to Port , LAG , or VLAN and
select the DHCP client interface.
•
Host Name — The system name as written in a DHCP Server log. This field can contain up to
20 characters.
•
Remove — When selected, removes DHCP clients.
–
Checked — Removes the selected DHCP client.
–
Unchecked — Maintains the selected DHCP client.
Adding DHCP Clients
1 Open the DHCP IPv4 Interface page.
2 Click Add .
The
Add DHCP IPv4 Interface page opens.
Figure 6-31. Add DHCP IPv4 Interface
3 Complete the information on the page.
4 Click Apply Changes .
The DHCP Interface is added, and the device is updated.
Modifying a DHCP IPv4 Interface
1 Open the DHCP IPv4 IP Interface page.
2 Modify the fields.
3 Click Apply Changes .
The entry is modified, and the device is updated.