Dell PowerConnect 3524P - Page 140

140 Configuring System Information
Adding an IPv6 Address to the Current Interface
1 Open the IPv6 Interface page.
2 Click Add IPv6 Address .
The
Add IPv6 Address page opens.
Figure 6-35. Add IPv6 Address
3 Complete the fields on the page.
4 Click Apply Changes .
The new address is added, and the device is updated.
Modifying IPv6 Interface Parameters
1 Open the IPv6 Interface page.
2 Select an interface in the Interface drop-down menu.
3 Modify the required fields.
4 Click Apply Changes .
The parameters are modified, and the device is updated.