Dell PowerConnect 3524P - Page 150

150 Configuring System Information
3 Complete the fields on the page.
4 Click Apply Changes .
The new neighbor is added, and the device is updated.
Modifying Neighbor Parameters
1 Open the IPv6 Neighbors page.
2 Select an IP address in the IPv6 Address drop-down menu.
3 Modify the required fields.
4 Click Apply Changes .
The parameters are modified, and the device is updated.
Deleting Neighbors
1 Open the IPv6 Neighbors page.
2 Click Show All.
The IPv6 Neighbors Table opens.
Figure 6-41. IPv6 Neighbors Table