Dell PowerConnect 3524P

214 Configuring System Information
• Tx Optional TLVs/Available TLVs — Contains a list of available TLVs that can be advertised by the
port. The possible field values are:
–
Network Policy — Advertises the network policy attached to the port.
–
Location — Advertises the port’s location.
–
PoE-PSE — Indicates if the connected media is a PoE or PSE (Power Sourcing Equipment)
device.
•
Network Policy/Available Network Policy — Contains a list of network policies that can be assigned to
a port.
•
Location Coordinate (16 Bytes in Hex) — Displays the device’s location map coordinates (16 bytes in
hex).
•
Location Civic Address (6-160 Bytes in Hex) — Displays the device’s civic or street address location,
for example 414 23rd Ave E. The possible field value are 6 - 160 bytes in hex.
•
Location ECS ELIN (10-25 Bytes in Hex) — Displays the device’s ECS ELIN location. The field
range is 10-25 bytes in hex.
Modifying MED Port Settings
1 Open the MED Port Settings page.
2 Modify the fields.
3 Click Apply Changes .
The parameters are saved to the device.
Displaying Advertise Information Details
1 Open the MED Port Settings page.
2 Click Details .
The
Details Advertise Information page opens.