Dell PowerConnect 3524P

216 Configuring System Information
• Device ID — The device ID advertised, for example, the device MAC address.
•
Device Type — The type of device.
•
LLDP MED Capabilities — The TLV that is advertised by the port.
•
LLDP MED Device Type — Indicates whether a sender is a network connectivity device or an
endpoint device.
•
Power Type — The port’s power type.
•
Power Source — The port’s power source.
•
Power Priority — The port’s power priority.
•
Power Value — The port’s power value, in Watts.
•
LLDP MED Network Policy — The port’s LLDP Network Policy for each of the following application
types:
–Voice
– Voice Signaling
– Guest Voice
– Guest Voice Signaling
– Softphone Voice
– Video Conferencing
– Streaming Video
– Video Signaling
•
Flags — Displays the VLAN tagging status for the application type. The possible field values are:
–
Tagged — The packets are tagged.
–
Untagged — The packets are not tagged.
•
VLAN ID — Displays the VLAN number for the application type.
•
User Priority — Displays the VLAN number for the application type.
•
DSCP Value — Defines the DSCP value assigned to the network policy. The possible field value is
1-64.
•
LLDP MED Location — The port’s advertised LLDP location:
–
Coordinates — Displays the device’s location map coordinates.
–
Civic Address — Displays the device’s civic or street address location, for example 414 23rd Ave E.
The possible field value are 6 - 160 characters.
–
ECS ELIN — Displays the device’s ECS ELIN location. The field range is 10 - 25.