Dell PowerConnect 3524P

218 Configuring System Information
Removing a Port From the Table
1 Open the Neighbors Information page.
2 Check the Remove checkbox of each port to be removed.
3 Click Apply Changes . The ports are removed.
Clearing the Table
1 Open the Neighbors Information page.
2 Click Clear Neighbors Table . The table is cleared.
Viewing the Details of the LLDP MED Information Advertised by a Neighbor Device
1 Open the Neighbors Information page.
2 Click the Details button next to the desired entry. The Details Neighbors Information page appears:
Figure 6-86. Details Neighbors Information