Dell PowerConnect 3524P - Page 232

232 Configuring System Information
Adding Users to a Group
1 Open the SNMPv3 User Security Model (USM) page.
2 Click Add .
The
Add SNMPv3 User Name page opens.
Figure 6-95. Add SNMPv3 User Name
3 Define the relevant fields.
4 Click Apply Changes .
The user is added to the group, and the device is updated.
Displaying the User Security Model Table
1 Open the SNMPv3 User Security Model (USM) page.
2 Click Show All .
The
User Security Model Table opens.
Figure 6-96. User Security Model Table