Dell PowerConnect 3524P

256 Configuring System Information
Copying Files
1 Open the Copy Files page.
2 Define the Source and Destination fields.
3 Click Apply Changes .
The file is copied, and the device is updated.
Restoring Company Factory Default Settings
1 Open the Copy Files page.
2 Click Restore Configuration Factory Defaults .
3 Click Apply Changes .
The company factory default settings are restored, and the device is updated.
Copying and Deleting Files Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the Copy
Files page.
The following is an example of the CLI commands:
Table 6-56. Copy Files CLI Commands
CLI Command Description
copy source-url destination-url Copies any file from a source to a destination.
delete startup-config Deletes the startup-config file.
delete url Deletes a file from the FLASH memory device.
console# delete startup-config
Startup file was deleted
console#
console# copy running-config startup-config
01-Jan-2000 06:55:32 %COPY-W-TRAP: The copy operation was
completed successfully
Copy succeeded
console#