258 Configuring System Information
Managing Files Using CLI Commands
The following table summarizes the equivalent CLI commands for managing system files.
The following is an example of the CLI commands:
Table 6-57. Copy Files CLI Commands
CLI Command Description
dir Display list of files on a flash file system
console# dir
Directory of flash:
File Name Permis-
sion
Flash
Size
Data
Size
Modified
-------------- ------ ------ ------ --------------------
3.txt rw 524288 523776 22-Feb-2005 18:49:27
setup rw 524288 95 22-Feb-2005 15:58:19
setup2 rw 524288 95 22-Feb-2005 15:58:35
image-1 rw 4325376 4325376 06-Feb-2005 17:55:32
image-2 rw 4325376 4325376 06-Feb-2005 17:55:31
test.txt rw 524288 95 22-Feb-2005 12:16:44
aaafile.prv -- 131072 -- 06-Feb-2005 19:09:02
syslog1.sys r- 262144 -- 22-Feb-2005 18:49:27
syslog2.sys r- 262144 -- 22-Feb-2005 18:49:27
directory.prv -- 262144 -- 06-Feb-2005 17:55:31
startup-config rw 524288 347 22-Feb-2005 11:56:03
Total size of flash: 16646144 bytes
Free size of flash: 4456448 bytes
To Next Page
Loading...
