Dell PowerConnect 3524P - Page 310

310 Configuring Switch Information
Modifying Storm Control Port Parameters
1 Open the Storm Control page.
2 Modify the fields.
3 Click Apply Changes
The Storm Control port parameters are saved to the device.
Displaying the Port Parameters Table
1 Open the Storm Control page.
2 Click Show All.
The Storm Control Settings Table opens.
Figure 7-26. Storm Control Settings Table
In addition to the fields in the Storm Control page, the Storm Control Settings Table contains the
following additional fields:
• Unit No. — Indicates the stacking member for which the Storm Control information is displayed.
•
Copy Parameters from Port — Indicates the specific port from which Storm Control parameters
are copied.
•
Copy To — Copies the Storm Control parameters to the selected ports.
Copying Parameters in the Storm Control Settings Table
1 Open the Storm Control page.
2 Click Show All .
The
Storm Control Settings Table opens.
3 Select the port from which settings are copied from the Copy Parameters from Port field.