334 Configuring Switch Information
Displaying the STP Port Table
1
Open the Spanning Tree Port Settings page.
2
Click
Show All
.
The
STP Port Table
opens.
Figure 7-37. STP Port Table
Defining STP Port Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for defining STP port parameters as
displayed in the STP Port Settings page.
Table 7-20. STP Port Settings CLI Commands
CLI Command Description
spanning-tree disable Disables spanning tree on a specific port.
spanning-tree cost
cost Configures the spanning tree cost
contribution of a port.
spanning-tree port-priority
priority Configures port priority.
show spanning-tree [ethernet
interface |
port-channel port-
channel-number][
instance instance-id]
Displays spanning tree configuration.
spanning-tree portfast Enables Fast Link mode.
spanning-tree guard root Enables root guard on all spanning tree
instances on the interface.
show spanning-tree [detail] [active |
blockedports] [instance instance-id]
Displays detailed spanning tree information
on active or blocked ports.
show spanning-tree mst-configuration Displays spanning tree MST configuration
identifier.
To Next Page
Loading...
