356 Configuring Switch Information
The following is an example of the CLI commands:
switchport trunk native vlan vlan-id Defines the port as a member of the specified VLAN, and the
VLAN ID as the port default VLAN ID (PVID).
switchport general allowed vlan add vlan-list
[tagged | untagged]
Adds or removes VLANs for a port in general mode.
switchport general pvid vlan-id Configures the PVID when the interface is in general mode.
console(config)# vlan database
console(config-vlan)# vlan 23-25
console(config-vlan)# end
console(config)# interface vlan 23
console(config-if)# name Marketing
console(config-if)# end
console(config)# interface ethernet 1/e8
console(config-if)# switchport mode access
console(config-if)# switchport access vlan 23
console(config-if)# end
console(config)# interface ethernet 1/e9
console(config-if)# switchport mode trunk
console(config-if)# switchport mode trunk allowed vlan
add 23-25
console(config-if)# end
console(config)# interface ethernet 1/e11
console(config-if)# switchport mode general
console(config-if)# switchport general allowed vlan add
23,25 tagged
console(config-if)# switchport general pvid 25
Table 7-27. Port-to-VLAN Group Assignments CLI Commands (continued)
CLI Command Description
To Next Page
Loading...
