Dell PowerConnect 3524P

Configuring Switch Information 373
The following is an example of the CLI commands:
show gvrp configuration [ethernet interface| port-
channel
port-channel-number]
Displays GVRP configuration information, including
timer values, whether GVRP and dynamic VLAN
creation is enabled, and which ports are running GVRP.
show gvrp error-statistics
[ethernet interface| port-
channel
port-channel-number]
Displays GVRP error statistics.
show gvrp statistics
[ ethernet interface| port-channel
port-channel-number]
Displays GVRP statistics.
clear gvrp statistics
[ethernet interface| port-channel
port-channel-number]
Clears all the GVRP statistics information.
Table 7-32. GVRP Global Parameters CLI Commands (continued)
CLI Command Description
console(config)# gvrp enable
console(config)# interface ethernet 1/e1
console(config-if)# gvrp enable
console(config-if)# gvrp vlan-creation-forbid
console(config-if)# gvrp registration-forbid
console(config-if)# end
console# show gvrp configuration
GVRP Feature is currently Enabled on the device
Maximum VLANs: 223
Port(s) GVRP-
Status
Registration Dynamic
VLAN
Creation
Timers
(milliseconds)
Join
Leave Leave
All
------- ------ ------------ -------- -------------- ----- -----
1/e11 Enabled Forbidden Disabled 200 900 10000
1/e12 Disabled Normal Enabled 200 600 10000