Dell PowerConnect 3524P

384 Configuring Switch Information
• LACP Port Priority (1-65535) — LACP priority value for the port.
•
LACP Timeout — Administrative LACP timeout. The possible field values are:
–
Short — Specifies a short timeout value.
–
Long — Specifies a long timeout value.
Defining Link Aggregation Global Parameters
1 Open the LACP Parameters page.
2 Complete the LACP System Priority field.
3 Click Apply Changes .
The parameters are defined, and the device is updated.
Defining Link Aggregation Port Parameters
1 Open the LACP Parameters page.
2 Complete the fields in the Port Parameters area.
3 Click Apply Changes .
The parameters are defined, and the device is updated.
Displaying the LACP Parameters Table
1 Open the LACP Parameters page.
2 Click Show All .
The
LACP Parameters Table opens.
Figure 7-68. LACP Parameters Table