Configuring Switch Information 403
Configuring Unregistered Multicast with CLI Commands
The following table summarizes the equivalent CLI commands for configuring Unregistered Multicast
on the device:
The following is an example of the CLI commands:
Table 7-44. Unregistered Multicast CLI Commands
CLI Command Description
bridge multicast unregistered Configures the forwarding state of unregistered multicast
addresses.
show bridge multicast unregistered Displays the unregistered multicast filtering configuration.
Console # show bridge multicast unregistered
Port Unregistered
---- -------------
1/1 Forward
1/2 Filter
1/3 Filter
To Next Page
Loading...
