412 Viewing Statistics
•
Single Collision Frames
— Number of single collision frame errors received on the selected interface.
•
Late Collisions
— Number of late collisions received on the selected interface.
•
Internal MAC Transmit Errors
— Number of internal MAC transmit errors on the selected interface.
•
Oversize Packets
— Number of oversize packets on the selected interface.
•
Received Pause Frames
— Number of received paused errors on the selected interface.
•
Transmitted Pause Frames
— Number of transmitted paused errors on the selected interface.
Displaying Etherlike Statistics for an Interface
1
Open the
Etherlike Statistics
page.
2
Select an interface in the
Interface
field.
Resetting Etherlike Statistics
1
Open the
Etherlike Statistics
page.
2
Click
Reset All Counters
.
The Etherlike Statistics counters are reset.
Viewing Etherlike Statistics Using the CLI Commands
The following table contains the CLI commands for viewing etherlike statistics.
Table 8-2. Etherlike Statistics CLI Commands
CLI Command Description
show interfaces counters [ethernet
interface | port-channel
port-
channel-number
]
Displays traffic seen by the physical
interface.
To Next Page
Loading...
