Dell PowerConnect 3524P

Viewing Statistics 429
Adding a RMON Event
1 Open the RMON Events Control page.
2 Click Add .
The
Add an Event Entry page opens.
3 Complete the information in the dialog and click Apply Changes .
The
Event Table entry is added, and the device is updated.
Modifying a RMON Event
1 Open the RMON Events Control page
2 Select an entry in the Event Table .
3 Modify the fields in the dialog and click Apply Changes .
The
Event Table entry is modified, and the device is updated.
Deleting RMON Event Entries
A single event entry can be removed from the RMON Events Control page by checking the Remove
check box on that page.
1
Open the RMON Events Control page.
2 Click Show All .
The
RMON Events Table page opens.
3 Check the Remove checkbox for the event(s) that needs to be deleted and then click Apply Changes .
The table entry is deleted, and the device is updated.
Defining Device Events Using the CLI Commands
The following table contains the CLI commands for defining device events.
Table 8-8. Device Event Definition CLI Commands
CLI Command Description
rmon event
index type
[community
text ] [description
text ] [owner name]
Configures RMON events.
show rmon events Displays RMON event table.