Dell PowerConnect 3524P

438 Viewing Statistics
The LAG Statistics page contains the following fields:
• Interface Statistics — Selects the interface statistics to display.
•
Etherlike Statistics — Selects the Etherlike statistics to display.
•
RMON Statistics — Selects the RMON statistics to display.
•
GVRP Statistics — Selects the GVRP statistics type to display.
•
Refresh Rate — Amount of time that passes before the statistics are refreshed.
Displaying LAG Statistics
1 Open the LAG Statistics page.
2 Select the statistic type to open.
3 Select the desired refresh rate from the Refresh Rate drop-down menu.
4 Click Draw .
The graph for the selected statistic is displayed.
Viewing LAG Statistics Using the CLI Commands
The following table contains the CLI commands for viewing LAG statistics.
Table 8-12. LAG Statistic CLI Commands
CLI Command Description
show interfaces counters [ethernet
interface | port-channel port-
channel-number
]
Displays traffic seen by the physical
interface.
show rmon statistics {ethernet
interface | port-channel port-
channel-number
}
Displays RMON Ethernet
statistics.
show gvrp statistics {ethernet
interface | port-channel port-
channel-number
}
Displays GVRP statistics.
show gvrp-error statistics {ethernet
interface | port-channel port-
channel-number
}
Displays GVRP error statistics.