Dell PowerConnect 3524P - Page 88

88 Configuring System Information
• From — Defines the time that DST begins each year. For example, DST begins locally every second
Sunday in April at 5:00 am. The possible field values are:
–
Day — The day of the week from which DST begins every year. The possible field range is
Sunday-Saturday.
–
Week — The week within the month from which DST begins every year. The possible field
range is 1-5.
–
Month — The month of the year in which DST begins every year. The possible field range is
Jan.-Dec.
–
Time — The time at which DST begins every year. The field format is Hour:Minute,
for example, 02:10.
•
To — Defines the recurring time that DST ends each year. For example, DST ends locally every fourth
Friday in October at 5:00 am. The possible field values are:
–
Day — The day of the week at which DST ends every year. The possible field range is
Sunday-Saturday.
–
Week — The week within the month at which DST ends every year. The possible field range is 1-5.
–
Month — The month of the year in which DST ends every year. The possible field range is
Jan.-Dec.
–
Time — The time at which DST ends every year. The field format is Hour:Minute,
for example, 05:30.
Selecting a Clock Source
1 Open the Time Synchronization page.
2 Define the Clock Source field.
3 Click Apply Changes .
The Clock source is selected, and the device is updated.
Defining Local Clock Settings
1 Open the Time Synchronization page.
2 Define the fields.
3 Click Apply Changes .
The local clock settings are applied.
Defining Clock Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the Time
Synchronization page.