Dell PowerConnect 5424

128 Configuring System Information
Modifying Neighbor Parameters
1 Open the IPv6 Neighbors page.
2 Select an IP address in the IPv6 Address drop-down menu.
3 Modify the required fields.
4 Click Apply Changes .
The parameters are modified, and the device is updated.
Deleting Neighbors
1 Open the IPv6 Neighbors page.
2 Click Show All.
The IPv6 Neighbors Table opens:
Figure 6-35. IPv6 Neighbors Table
3 Select the Remove check box in the desired entry. Alternatively, select the desired value in the Clear
Ta bl e
field. The possible filed values are:
– Static Only — Clears the the IPv6 Neighbor Table static entries.
– Dynamic Only — Clears the IPv6 Neighbor Table dynamic entries.
– All Dynamic and Static — Clears the IPv6 Neighbor Table static and dynamic address entries.
– None — Does not clear any entries.
4 Click Apply Changes .
The selected neighbors are deleted, and the device is updated.