Dell PowerConnect 5424

188 Configuring System Information
Defining LLDP MED Port Settings
The MED Port Settings contains parameters for assigning LLDP network policies to specific ports.
To open the MED Port Settings page, click System
→ LLDP-MED → Port Settings in the tree view.
Figure 6-76. MED Port Settings
The MED Port Settings page contains the following fields:
• Port — Displays the port on which LLDP-MED is enabled or disabled.
•
Enable LLDP-MED — Indicates if LLDP-MED is enabled on the selected port. The possible field
values are:
Checked — Enables LLDP-MED on the port.
Unchecked — Disables LLDP-MED on the port. This is the default value.