Dell PowerConnect 5424 User Manual

168 Configuring System Information
The following is an example of the CLI commands:
Defining Line Passwords
The Line Password page contains fields for defining line passwords for management methods. To open the
Line Password page, click System → Management Security→ Line Passwords in the tree view.
Figure 6-62. Line Password
Table 6-34. Local User Database CLI Commands
CLI Command Description
username name [ password password ] [ level level ] [ encrypted ] Establishes a username-based authentication system.
set username name active Reactivates a suspended user’s access rights.
console(config)# username bob password lee level 15
console# set username bob active

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation