248 Configuring Device Information
The following is an example of the CLI commands:
Configuring Advanced Port Based Authentication
The Multiple Hosts page provides information for defining advanced port based authentication settings
for specific ports. To open the Multiple Hosts, click Switch →Network Security → Multiple Hosts.
Figure 7-3. Multiple Hosts
console> enable
Console# show dot1x
Interface Admin Mode Oper Mode Reauth
Control
Reauth
Period
Username
--------- ---------- ---------- -------- ------ --------
g1 Auto Authorized Ena 3600 Bob
g2 Auto Authorized Ena 3600 John
g3 Auto Unauthorized Ena 3600 Clark
g4 Force-auth Authorized Dis 3600 n/a
To Next Page
Loading...
