66 Using Dell OpenManage Switch Administrator
The following example shows how to create an access-list called "mlist", configure two management
interfaces ethernet g1 and ethernet g9, and make the access-list the active list:
Console (config)# management access-list mlist
Console (config-macl)# permit ethernet g1
Console (config-macl)# permit ethernet g9
Console (config-macl)# exit
Console (config)# management access-class mlist
SSH Public Key
The SSH Public Key mode contains commands to manually specify other device SSH public keys.
The Global Configuration mode command crypto key pubkey-chain ssh is used to enter the
SSH Public Key-chain Configuration mode.
The following example enters the SSH Public Key-chain configuration mode:
Console(config)# crypto key pubkey-chain ssh
Console(config-pubkey-chain)#
CLI Examples
CLI commands are provided as configuration examples. For a full description of the CLI commands,
including examples, refer to the "CLI Reference Guide" included on the Documentation CD.
To Next Page
Loading...
