Dell PowerConnect 5424

Configuring System Information 141
4 Define the fields.
5 Click Apply Changes .
The
ARP Table entry is added, and the device is updated.
Displaying the ARP Table
1 Open the ARP Settings page.
2 Click Show All .
The
ARP Table opens:
Figure 6-46. ARP Table Page
Deleting ARP Table Entry
1 Open the ARP Settings page
2 Click Show All.
The ARP Table page opens.
3 Select a table entry.
4 Select the Remove check box.
5 Click Apply Changes .
The selected
ARP Table entry is deleted, and the device is updated.