Dell PowerConnect 5424

Configuring System Information 159
Assigning Secure HTTP Sessions an Authentication Sequence
1 Open the Select Authentication page.
2 Select an authentication sequence in the Secure HTTP field.
3 Click Apply Changes .
Secure HTTP sessions are assigned an authentication sequence.
Assigning Access Authentication Profiles or Sequences Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the Select
Authentication page.
Table 6-32. Select Authentication CLI Commands
CLI Command Description
enable authentication [default |
list-name]
Specifies the authentication method list when
accessing a higher privilege level from a remote
Telnet or console.
login authentication [default |
list-name]
Specifies the login authentication method list
for a remote Telnet or console.
ip http authentication method1
[method2.]
Specifies authentication methods for HTTP
servers.
ip https authentication method1
[method2.]
Specifies authentication methods for HTTPS
servers.
show authentication methods Displays information about the authentication
methods.