Configuring Device Information 369
The following is an example of the CLI commands:
Console> enable
Console# config
Console (config)# ip igmp snooping
Console (config)# interface vlan 1
Console (config-if)# ip igmp snooping mrouter learn-pim-dvmrp
Console (config-if)# ip igmp snooping host-time-out 300
Console (config-if)# ip igmp snooping mrouter-time-out 200
Console (config-if)# exit
Console (config)# interface vlan 1
Console (config-if)# ip igmp snooping leave-time-out 60
Console (config-if)# exit
Console (config)# exit
Console # show ip igmp snooping groups
Vlan IP Address Querier Ports
----- ------------------ -------- -----
1 224-239.130|2.2.3 Yes g1, g2
19 224-239.130|2.2.8 Yes g9-11
Console # show ip igmp snooping interface 1000
IGMP Snooping is globally enabled
To Next Page
Loading...
