Configuring Device Information 373
Configuring Unregistered Multicast with CLI Commands
The following table summarizes the equivalent CLI commands for configuring Unregistered Multicast
on the device:
The following is an example of the CLI commands:
Table 7-42. Unregistered Multicast CLI Commands
CLI Command Description
bridge multicast
unregistered
Configures the forwarding state of
unregistered multicast addresses.
show bridge multicast
unregistered
Displays the unregistered multicast
filtering configuration.
Console # show bridge multicast unregistered
Port Unregistered
---- -------------
g1 Forward
g2 Filter
g3 Filter
To Next Page
Loading...
