378 Viewing Statistics
Receive Statistics
•
Total Bytes (Octets)
— Number of octets received on the selected interface.
•
Unicast Packets
— Number of Unicast packets received on the selected interface.
•
Multicast Packets
— Number of Multicast packets received on the selected interface.
•
Broadcast Packets
— Number of Broadcast packets received on the selected interface.
•
Packets with Errors
— Number of error packets received from the selected interface.
Transmit Statistics
•
Total Bytes (Octets)
— Number of octets transmitted on the selected interface.
•
Unicast Packets
— Number of Unicast packets transmitted on the selected interface.
•
Multicast Packets
— Number of Multicast packets transmitted on the selected interface.
•
Broadcast Packets
— Number of Broadcast packets transmitted on the selected interface.
•
Packets with Errors
— Number of error packets transmitted from the selected interface.
Displaying Interface Statistics
1
Open the
Interface Statistics
page.
2
Select an interface in the
Interface
field.
The interface statistics are displayed.
Resetting Interface Statistics Counters
1
Open the
Interface Statistics
page.
2
Click
Reset All Counters
.
The interface statistics counters are reset.
Viewing Interface Statistics Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing interface statistics.
Table 8-1. Interface Statistics CLI Commands
CLI Command Description
show interfaces counters
[ethernet
interface | port-channel port-
channel-number
]
Displays traffic seen by the physical
interface.
To Next Page
Loading...
