Dell PowerConnect 5424

Viewing Statistics 403
Modifying an Alarm Table Entry
1 Open the RMON Alarms page.
2 Select an entry in the Alarm Entry drop-down menu.
3 Modify the fields in the dialog as required.
4 Click Apply Changes .
The entry is modified, and the device is updated.
Displaying the Alarm Table
1 Open the RMON Alarms page.
2 Click Show All .
The
Alarms Table page opens.
Deleting an Alarm Table Entry
1 Open the RMON Alarms page.
2 Select an entry in the Alarm Entry drop-down menu.
3 Select the Remove check box.
4 Click Apply Changes .
The selected entry is deleted, and the device is updated.
Defining Device Alarms Using the CLI Commands
The following table summarizes the equivalent CLI commands for defining device alarms.
Table 8-10. Device Alarm CLI Commands
CLI Command Description
rmon alarm index variable interval
rthreshold fthreshold revent fevent
[type type] [startup direction] [owner
name]
Configures RMON alarm conditions.
show rmon alarm-table Displays summary of the alarm table.
show rmon alarm Displays RMON alarm configuration.