Dell PowerConnect 5424 User Manual

76 Configuring System Information
Defining Clock Settings Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the Time
Synchronization page.
Table 6-2. Clock Setting CLI Commands
The following is an example of the CLI commands:
CLI Description
clock source {sntp} Configures an external time source for the system
clock.
clock timezone hours-offset
[minutes minutes-
offset][zone acronym]
Sets the time zone for display purposes.
clock summer-time Configures the system to automatically switch to
summer time (Daylight Savings Time).
clock summer-time recurring
{usa | eu | {week day
month hh:mm week day month
hh:mm}} [offset offset]
[zone acronym]
Configures the system to automatically switch to
summer time (according to the USA and
European standards.)
clock summer-time date date
month year hh:mm date
month year hh:mm [offset
offset] [zone acronym]
Configures the system to automatically switch to
summer time (Daylight Savings Time) for a
specific period - date/month/year format.
Console(config)# clock timezone -6 zone CST
Console(config)# clock summer-time recurring first sun apr 2:00
last sun oct 2:00

Dell PowerConnect 5424 Specifications

General

Ports	24 x 10/100/1000Base-T
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
VLAN Support	Yes
Rack Mountable	Yes
Power Supply	Internal
MAC Address Table Size	8K entries
RAM	128 MB
Flash Memory	16 MB
Voltage Required	100-240V AC
Management	Web, CLI, SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% (non-condensing)
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Remote Management Protocol	SNMP, RMON, Telnet
Features	QoS, VLAN, Link Aggregation