Dell PowerConnect 6024 - Page 108

118 Configuring System Information
www.dell.com | support.dell.com
Last Response — The last time a response was received from the SNTP server.
Offset — Timestamp difference between the device’s local clock and the acquired time from the
SNTP server.
Delay — The amount of time it takes to reach the SNTP server.
Remove — Select the check box to remove a specific SNTP server from the SNTP Servers list.
Adding an SNTP Server
1 Open the SNTP Servers page.
2 Click Add.
The Add SNTP Server page opens:
Figure 6-12. Add SNTP Server
3
Define the fields.
4 Click Apply Changes .
The SNTP server is added, and the device is updated.
Displaying the SNTP Servers Table
1 Open the SNTP Servers page.
2 Click Show All.
The SNTP Servers Table page opens:
Figure 6-13. SNTP Servers Table