Dell PowerConnect 6024 - Page 183

Configuring System Information 193
The following is an example of the CLI commands:
show tacacs+ [ ip-address ] Displays configuration and statistics for a
TACACS+ server.
Console(config)# tacacs-server host 171.16.8.1 port 49 key abc
Console(config)# end
Console# show tacacs
Device Configuration
--------------------
IP address Status Port Single
Connection
TimeOut Source
IP
Priority
----------- --------- ---- ---------- ------- ------ --------
171.16.8.1 Not
Connected
49 No Global Global 0
OOB Host Configuration
IP address Status Port Single
Connection
TimeOut Source
IP
Priority
----------- --------- ---- ---------- ------- ------ --------
No TACACS server is configured.
Device Configuration
--------------------
Source IP: 0.0.0.0
OOB host Configuration
----------------------
Source IP : 0.0.0.0
Table 6-37. TACACS+ Settings CLI Commands
CLI Command Description