260 Configuring Switch Information
www.dell.com | support.dell.com
The following is an example of the CLI commands:
Console (config)# interface ethernet g18
Console (config-if)# description RD_SW#3
Console(config-if)# speed 100
Console (config-if)# shutdown
Console (config-if)# no shutdown
Console (config-if)# duplex full
Console (config-if)# negotiation
Console (config-if)# back-pressure
Console (config-if)# flowcontrol on
Console (config-if)# mdix auto
Console (config-if)# exit
Console (config)# exit
Console> set interface active ethernet g9
show interfaces
configuration [ethernet
interface
| port-channel
port-channel-number
oob-
eth
interface
]
Displays the configuration for all
configured interfaces.
show interfaces status
[ethernet
interface
| port-
channel
port-channel-
number
oob-eth
interface
]
Displays the status for all configured
interfaces.
show interfaces
description [ethernet
interface
| port-channel
port-channel-number
oob-
eth
interface
]
Displays the description for all
configured interfaces.
Table 7-8. Port Configuration CLI Commands
CLI Command Description
To Next Page
Loading...
