Configuring Quality of Service 459
can be applied to multiple classes in the same policy map, but cannot be used across different
policy maps.
Single
— Configures the class to use manually configured information rates and exceed
actions.
Aggregate Policer
— User-defined aggregate policers.
Ingress Committed Information Rate (CIR)
— CIR in bits per second. This field is only relevant
when the
Police
value is
Single
.
Ingress Committed Burst Size (CBS)
— CBS in bytes per second. This field is only relevant when
the
Police
value is
Single
.
Exceed Action
— Action assigned to incoming packets exceeding the CIR. This field is only
relevant when the
Police
value is
Single
. Possible values are:
Drop
— Drops packets exceeding the defined CIR value.
Remark DSCP
—Remarks packets’ DSCP values exceeding the defined CIR value.
None
—Forwards packets exceeding the defined CIR value.
Adding a Policy and Its First Class
1
Open the
QoS Policy
page.
2
Click
Add
to display the
Create New Advanced Mode Policy
page.
Figure 10-17. Create New Advanced Mode Policy Page
To Next Page
Loading...
